A Carl's Place enclosure decision starts with the structure you need, not with the assumption that every home needs DIY and every business needs Pro. A demanding home installation may benefit from the Pro configuration, while a simpler room may not need the additional structure or depth.
Compare the C-Series DIY enclosure kit and C-Series Pro enclosure kit against the same room plan. The goal is to buy the appropriate system, including the parts required to finish it.
The frame requirements are different
The DIY system uses 1-inch EMT framing, while the Pro system uses 2-inch EMT. For the linked enclosure kits, framing pipes are not automatically included: add the matching pipe kit or source the correct tubing using the supplied cut list.
These are trade sizes. Do not order tubing or fittings by guessing the outside diameter from the name. Follow the documentation for the exact enclosure generation and selected dimensions.
Manufacturer references: Carl's DIY enclosure information and Carl's Pro enclosure information. The manufacturer's range evolves; confirm the version, screen, fittings, and included accessories shown on the specific listing you order.
Depth is a layout decision
When comparing enclosures, separate the depth in front of the impact screen from the total footprint, which can include structure behind it. A nominal enclosure size should never replace the detailed dimensional drawing.
The Pro listing offers several depth configurations. More enclosure depth can be useful for a particular room design, but it also affects how the enclosure occupies the space and interacts with the golfer, projector, lighting, and launch monitor.
Draw the front opening, screen plane, rear structure, and hitting position. Then check both the equipment clearances and the golfer's full swing. A deeper enclosure is not automatically safer in every arrangement, and a shallower enclosure is not permission to stand closer than the screen instructions allow.
Compare the selected configurations, not two starting prices
| Component | What to verify |
|---|---|
| Impact screen | Selected material, finished dimensions, and attachment system |
| Frame | Correct tubing, cut lengths, fittings, and pipe-kit inclusion |
| Protection | Frame padding, side protection, and any ceiling baffles |
| Light control | Surround, optional back cover, and room lighting |
| Equipment mounting | Approved mounts, structural suitability, and exact positions |
| Floor interface | Mat height, surrounding turf, and screen-bottom arrangement |
A low starting price is not a complete installation quote. Compare the same screen quality and required accessories on both sides before deciding where the better value lies.
Do not assume accessories transfer between systems
Pipe sizes, screen dimensions, frame depths, and attachment details can differ. A component carrying the Carl's Place name is not automatically compatible with every Carl's enclosure.
For the DIY build, use the corresponding DIY pipe framing kit. For the Pro build, check the Pro pipe framing kit. Match the size selection to the enclosure, rather than simply choosing the closest-sounding option.
The same caution applies to baffles, back covers, and net extensions. Review the enclosure accessories as a compatibility checklist, not a list of items every buyer must add.
Plan equipment mounting before assembly
An overhead launch monitor and a projector each have specific positioning requirements. Decide where their lenses or sensors need to be before choosing an enclosure depth or a frame-mounted accessory.
Do not assume a crossbar can support a device merely because it is nearby. Confirm the intended mounting method and load requirements with the relevant documentation. Keep ventilation and the projection path clear, and ensure cables do not interfere with the hitting area.
Which enclosure would we shortlist?
Start with DIY when its sizes and structure satisfy the room and you want a straightforward enclosure build with individually selected accessories. Start with Pro when its frame system, depth configurations, or supported mounting arrangements answer a specific requirement that DIY does not.
The labels are not a judgment of the golfer's skill. A scratch player does not automatically need Pro, and a beginner building a large permanent golf room should not automatically rule it out.
Questions that prevent ordering mistakes
Does the enclosure kit include a launch monitor and projector?
Do not assume so. An enclosure kit and a complete simulator package are different purchases. Check the itemized inclusions.
Are framing pipes optional?
The pre-cut pipe kit is optional; the correct framing structure is not. You need the specified pipes from an appropriate source to assemble the enclosure.
Can I choose a screen by the room's wall-to-wall width?
Allow for the full enclosure, assembly space, and required clearances. Use the model's drawings rather than only the visible image dimensions.
See our Carl's Place enclosures and enclosure packages. Bring your room measurements and planned equipment list to Indoor Golf Kit before committing to a configuration.
