Wall padding, curtains and baffles cover different parts of a golf simulator. Choose them by the exposed surface and likely ball path, not by color or the appearance of a finished room.
A complete enclosure may still leave surrounding walls, a ceiling section or a frame edge exposed. A built-in screen may require a more extensive room-treatment plan. Start by identifying those areas from the actual hitting point.
Give each component a clear job
| Component | Main planning role | What it does not automatically replace |
|---|---|---|
| SIGPRO Wall Padding | Cover suitable wall or ceiling areas using the intended mounting system | A correctly installed impact screen |
| SIG Curtains | Flexible side coverage and room division in an approved layout | Rigid padding on every exposed hard surface |
| SIG Baffle | Additional coverage at the specified enclosure location | Side barriers or the complete enclosure surround |
| Frame padding | Cover exposed structural members with matching protection | Fixing an incorrect screen attachment |
Use the product's intended application and installation instructions. Decorative upholstery, ordinary drapes and unrelated foam products should not be assumed to provide the same function as specified simulator components.
Map the room from the ball position
Mark the screen plane, hitting position and enclosure edges. Look for the areas outside the main screen where a mishit or high shot could encounter a hard surface. Include wall corners, the ceiling, pipes, mounts and nearby equipment.
This is a coverage exercise, not a prediction that every possible miss will follow one path. Use the manufacturer's containment guidance and leave the required playing distances. If the room cannot provide appropriate containment, do not treat extra decorative panels as a substitute for a suitable layout.
Evaluate both right- and left-handed use if the room is shared. The exposed side and stance area can change even when the ball stays at a common point.
Padding: order for the surface and fixing method
Measure the actual area to be covered, then compare the available panel dimensions and attachment method. Plan how the layout meets corners, adjacent panels and the enclosure edge.
For panels mounted overhead, use the manufacturer's specified attachment approach and appropriate structure. Do not infer load capacity from a wall installation or from how another room looks in a photograph.
Also check access to outlets, controls and service points. A padded finish should not prevent inspection or maintenance of the equipment behind or beside it. Where a building or venue needs specific material documentation, obtain it for the selected product rather than assuming every padded panel has the same rating.
Curtains: include the track and storage space
For SIG Curtains, measure the deployed span and the space occupied when gathered or stored. Confirm the matching track, required length, attachment and any valance separately.
A curtain that covers the side during play may still need an area to stack when the room is used for something else. Include that area in the stored-room drawing. Do not position gathered fabric where it obstructs equipment ventilation or a required access path.
Make the overlap and lower-edge arrangement consistent with the instructions. A narrow gap between a curtain and frame can undermine an otherwise useful coverage plan.
Baffles: confirm the exact enclosure fit
A baffle is normally designed for a specific mounting location and compatible enclosure arrangement. Match the model, size and attachment method rather than buying solely by its width.
If high shots are the concern, inspect the full upper area: screen edge, top frame, surround and any space beyond it. A baffle can be one part of the solution, but it does not correct every exposed ceiling or projector position.
Follow the specified placement so the accessory does not interfere with the projected image, launch-monitor view or the player's swing.
Check screen tension and exposed frame separately
Adding wall treatment does not correct an impact screen that contacts a hard backing or has been tensioned incorrectly. Review the screen's clearance, attachments and lower edge as a separate part of the inspection.
Likewise, a hard frame section close to the image needs the matching protective treatment. Do not assume the screen will cover it after a ball impact if it is visibly exposed at rest.
Turn the coverage plan into a parts list
For each area, record its dimensions, selected component, mounting hardware, compatibility and access requirement. Mark which items are already included with the enclosure and which are additional purchases.
This avoids buying several overlapping accessories while missing one exposed edge. It also makes a quote easier to compare because every product has a defined purpose.
After installation, inspect the completed setup according to the manufacturers' guidance and revisit the plan after changing the tee, screen, floor or monitor. Protection is part of the room design, not a final decorative layer applied after all positions are fixed.
Plan your next step
Plan SIGPRO Wall Padding, SIG Curtains and SIG Baffle by the area each needs to cover. Compare the required coverage with your exact enclosure before ordering.
Sources and specifications
Specifications reviewed October 10, 2026. Dimensions and worked examples are for planning; use the current installation guide and selected product configuration before ordering.
